PORSCHE 924 GT ACCELERATION
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
- equal length headers with long tube design
- 200 cell German hjs "hf" sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- rsr style connections and quick release clamps
- quad 3.5" (90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only.
- weighs 62 lbs.(28,0 kg).
Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany.
Performance gains (includes FVD software, sport airfilter and exhaust):, based on the 3.8 l:
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7900rpm
Acceleration 0-100km/h - 4.4s
Our "brombacher" system use...(choose a part on the right to read more)
General Fitment 911 2005-08
From $8,190.60
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
- equal length headers with long tube design - 200 cell German hjs hf sport catalysts with u torque design - 2 3/4 tubing (70mm) - rsr style connections and quick release clamps - quad 3.5 (90mm) round tips - made in Germany -+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. - weighs 62 lbs.(28,0 kg). Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany. Performance gains (includes FVD software, sport airfilter and exhaust):, based on the 3.8 l: max. Power - 283kw (385hp) @ 6500rpm max. Torque - 441nm (325lbf ft) @ 4000rpm max. Speed - 307km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.4s our Brombachersystem uses 2 ¾ inch (70mm) tubing and is modula...(choose a part on the right to read more)
$9,220.20
Make a selection
TUV version
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90mm) tips and are made for this muffler. Kindly order bes 997 160 41s separately.
FVD le...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,479.10
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Replaces worn and defective accelerator pump diaphragm to eliminate hesitation and stumble during acceleration. Fits just like original parts. Manufactured from fuel resistant, rubber membrane with silicon bronze center plunger hardware. Fits weber 40, 44, and 48 idf early model carbs with roller on accelerator pump arm.
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple.
With most vehicles you simply remove the disposable air filter and replace it with a K&N. K&N stock replacement air filters for street vehicles are covered by their famous K&N million-mile limited warranty and will be the last air filter your vehicle will ever need.
Features:
Length: 6.313 inches
Width: 6.313 in...(choose a part on the right to read more)
General Fitment 911 2009-12
Endless ewig mx-72 front brake pads Porsche 993 turbo 93-97
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
The mx72 is a ceramic-carbon-metallic compound, which is developed for fast road cars to be used at high speed driving with repeated braking and acceleration. It is suited for use in a power brake system with or without abs. The mx72 is a high heat...(choose a part on the right to read more)
General Fitment 911 1989-94
Billy boat performance exhaust high performance stainless steel exhaust components for the 2006-2008 Porsche 997 turbo will enhance the driving experience of your Porsche. The mufflers are designed to be used with the stock exhaust tips. For a sportier note the design team at b&b also developed a set of primary muffler bypass pipes that will not only increase the sound they also give you added performance. New for 2010 the mufflers and pipes are avialable in a satin finish or in a polished ke finish. All of these components have no effect on the factory warranty or emissions.
Billy boat performance exhaust line of performance exhaust for the Porsche 997 turbo incorporates the latest in resonance control t...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,660.93
Make a selection
Endless ewig mx-72 front brake pads Porsche Boxster 3.2s 05-07
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
The mx72 is a ceramic-carbon-metallic compound, which is developed for fast road cars to be used at high speed driving with repeated braking and acceleration. It is suited for use in a power brake system with or without abs. The mx72 is a high h...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08 BOXSTER 1997-04 911 2005-08 CAYMAN 2006-08 911 TURBO/GT2 2001-05
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
The mx72 is a ceramic-carbon-metallic compound, which is developed for fast road cars to be used at high speed driving with repeated braking and acceleration. It is suited for use in a power brake system with or without abs. The mx72 is a high heat resistance compound which can also be used for circuit racing, li...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
For years mansory has been committed to perfection, craftsmanship and well-engineered technology. Mansory is headquartered in switzerland, allowing them to stay up to date and constantly improve upon the newest Porsche offerings. Mansory stands for driving pleasure, stylish design, and progressive engineering. Masonry's customization and cosmetic upgrades also fall in line with this performance-driven philosophy. Their vast product line offers complete aerodynamic kits, ultra-light alloy rims, and powerful engine performance parts; all of which match the high quality workmanship of the exotic vehicles they are designed for. Production meeting the highest technological standards, masterful workmanship, and the ...(choose a part on the right to read more)
General Fitment 911 2009-12
$1,278.54
Make a selection
B&b exhaust muffler Porsche Boxster 987 & Cayman s 05+
Purge resonance technology is now available for all Porsche applications, including the Porsche Cayman s and Boxster 987. This radically new b&b technology tunes the exhaust note - the result is pure German performance sound at idle and under acceleration, while the interior cabin remains a comfortable ride at cruise speeds. Once again b&b advanced technology has proven why it is the leader for superior performance and sound quality for exhaust applications.
Features 3.5" round double wall tips.
For install instructionsclick here
To hear a sound clip on the b&b exhaust, here
This product is made to order, please allow 7-10 day...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$2,070.20
Make a selection
High performance replacement for the restrictive factory air intake system increases cold air induction for increased power and throttle response
Features:
Fits all Porsche 970 panamera s vehicles
High performance dual-conical air filters are included
Uses dry-style filters that do not require oiling; simply wash with warm water and reuse
Improves power across the rpm range; noticeable increase in throttle response and acceleration
Simple diy installation with common tools
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment PANAMERA 2010-14
From $795.00
Make a selection
Product details:
Our direct replacement silicone boost hose kit will eliminate a common boost leakage failure problem on the 996 tt and especially modified high horsepower 996 tt cars.
Features:
-fits all Porsche 996 GT2 vehicles (2001-2005)
-on most all modified 996 tt the OEM boost hoses will leak and even blow out under acceleration leaving you with a loss in power and even stranded with a car that will not run.
-made out of high quality air craft quality silicone. Comes with cnc machined billet aluminum hose ends, shiny red or black are the color choices.
-successfully tested up to over +1000 hp twin turbos.
-guaranteed no...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Complete exhaust system include 4 catalytic (200cpsi), middle mufflers, endmuffler.
All system tubes are 70mm! Low back presure! Helps turbos fast spinning and result in incredible acceleration!
General Fitment CAYENNE 2003-06
$13,406.25
Make a selection
- super lightweight (13lbs.) 5.9kg
- quicker acceleration
- constructed from aircraft-quality 6061-t6 grade aluminum
- replaceable treated-steel heat soak friction surface
Oem screws can be used, if necessary order 10 x screw (n90665101) separately.
Fits: s, 3.4l, 239kw (13-), r 3.4l, 243 kw (11-), 3.4l, 235 kw (09-), spyder, 235kw (11-), 228 kw (09-)
General Fitment CAYMAN 2009-12 BOXSTER 2009-11
From $1,005.94
Make a selection
- super lightweight (13lbs.) 5.9kg - quicker acceleration - constructed from aircraft-quality 6061-t6 grade aluminum - replaceable treated-steel heat soak friction surface OEM screws can be used, if necessary order 10 x screw (n90665101) separately. Tech tip: use this flywheel only in combination of pressure plates with automatic reset!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 2005-08
From $911.90
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|